Flow Plugin for OpenCode

opencode-plugin-flow is a skills-first workflow helper for OpenCode. The skills carry planning, execution, validation, cleanup, UI quality, review, safe commit preparation, and orchestration judgment. The plugin code stays deliberately small: it keeps a durable .flow/session.json ledger and enforces the hard gates prompts should not be trusted to remember.

Flow v4 is a breaking simplification. It does not preserve v3 session layouts or retired tool aliases.

What Flow adds

• A resumable one-feature-at-a-time loop for larger coding work.
• Skill-guided planning, running, validation, review, cleanup, and UI quality.
• First-class validation guidance through flow-test, plus user-triggered safe commit preparation through flow-commit.
• Hidden evidence, review, validation, audit, verifier, and candidate workers for broad work.
• Structured handoffs with coverage, evidence, confidence, and gaps.
• Runtime gates for approval immutability, validation evidence, review evidence, and safe session closure.

The manager still owns every Flow state change. Workers gather evidence; they do not approve plans, complete features, or close sessions.

Install or update

Use OpenCode's plugin installer when your OpenCode version supports it:

opencode plugin opencode-plugin-flow@4.1.12 --global --force
npx -y opencode-plugin-flow@4.1.12 sync

The first command adds Flow to your global OpenCode plugin config or replaces an older pinned Flow entry. The sync command pre-installs Flow's managed skills so the next OpenCode startup can load the refreshed skill registry.

Then start or restart OpenCode. On startup, the plugin syncs its global skills into:

~/.config/opencode/skills/flow/SKILL.md
~/.config/opencode/skills/flow-plan/SKILL.md
~/.config/opencode/skills/flow-run/SKILL.md
~/.config/opencode/skills/flow-test/SKILL.md
~/.config/opencode/skills/flow-review/SKILL.md
~/.config/opencode/skills/flow-deslop/SKILL.md
~/.config/opencode/skills/flow-ui-quality/SKILL.md
~/.config/opencode/skills/flow-commit/SKILL.md

If your OpenCode version does not have opencode plugin, add Flow to your OpenCode config manually instead:

{
  "plugin": ["opencode-plugin-flow@4.1.12"]
}

When updating through this fallback, replace the older opencode-plugin-flow@... entry with the new pinned version instead of adding a duplicate entry.

Then run the same pre-start skill sync and start or restart OpenCode:

npx -y opencode-plugin-flow@4.1.12 sync

Project-local skill overrides still work through OpenCode's normal lookup:

.opencode/skills/flow-plan/SKILL.md

If Flow installs or updates skills during the current OpenCode startup, restart OpenCode once more before using Flow commands. OpenCode may have already scanned the skill registry for the running process, so a just-synced skill can exist on disk while still being unavailable to that process. Flow reports this through flow_status as setup.skills.status: "restart_required".

To update a pinned Flow version later, rerun the same install command with the new version.

--force is intentional here: OpenCode keeps an existing same-package plugin entry unless replacement is requested, so the flag avoids leaving an older pinned version in your global opencode.json.

To inspect the installed skill set:

npx -y opencode-plugin-flow@4.1.12 doctor

For automation, keep the default human-readable doctor output and opt into machine behavior explicitly:

npx -y opencode-plugin-flow@4.1.12 doctor --json
npx -y opencode-plugin-flow@4.1.12 doctor --check

doctor --check and doctor --strict exit nonzero when the health status is sync_required or action_required; plain doctor remains advisory and exits successfully.

If a command reports Skill "flow-review" not found. Available skills... or a similar Flow skill-loading error after upgrading, it is usually an older OpenCode process or stale resolved command body. Flow command preflight replaces public Flow command bodies in the running process, and /flow-review no longer asks OpenCode to native-load required public Flow skills. Public Flow command preflight replaces stale command bodies with bundled command instructions, so /flow-auto, /flow-plan, /flow-run, and /flow-review can continue even when native skill discovery lags. Run /flow-status or the doctor command above first. Missing, incomplete, or outdated managed skills can still be repaired with:

npx -y opencode-plugin-flow@4.1.12 sync

Then restart OpenCode so the refreshed registry is loaded. sync manages all bundled Flow skills: flow, flow-plan, flow-run, flow-test, flow-review, flow-deslop, flow-ui-quality, and flow-commit. If doctor reports a foreign or edited managed skill folder, Flow leaves it in place and asks for a user decision instead of overwriting local work.

Commands

Commands are bundled entrypoints. OpenCode still syncs the Flow skills for discoverability and manual use, but public command execution does not depend on native skill discovery for the required Flow loop:

Command	Purpose
/flow-auto <goal>	Drive the full skill-guided loop.
/flow-plan <goal>	Create or approve a plan.
/flow-run	Execute one approved feature.
/flow-review	Run a read-only review.
/flow-status	Show the active session and next action.

Flow reserves its public command IDs (flow-auto, flow-plan, flow-run, flow-review, flow-status) and internal worker IDs (flow-reviewer, flow-evidence-worker, flow-validation-worker, flow-audit-worker, flow-candidate-worker, flow-verifier-worker) while the plugin is enabled. The plugin injects those entries to keep command preflight and worker permission boundaries safe.

flow-test and flow-commit are managed helper skills, not public commands in this release. flow-commit is user-triggered only and stays outside the autonomous Flow runtime loop.

Tools

The runtime exposes seven tools:

Tool	Purpose
flow_status	Read the active session and next action.
flow_plan_save	Create a session and/or save a draft plan.
flow_plan_approve	Approve the draft plan.
flow_run_start	Start the next runnable feature.
flow_feature_complete	Record completion or blocker evidence for the active feature.
flow_feature_reset	Reset one feature and its dependents.
flow_session_close	Archive the active session as completed, deferred, or abandoned.

There is no flow_context and no separate review-record tool. Review evidence is part of flow_feature_complete: every completed feature needs a passing featureReview, and the final feature also needs a passing finalReview.

Runtime Contract

The runtime owns only safety:

• .flow/session.json is the active source of truth.
• .flow/opencode-instructions.md is a generated OpenCode instruction projection of the active session. It is refreshed from session.json; do not edit it.
• .flow/history/<session-id>.json stores closed sessions.
• Session writes are locked and atomic.
• Flow writes .flow/.gitignore so session state stays out of Git by default.
• Mutable roots cannot be filesystem roots or $HOME.
• Plans cannot be changed after approval.
• Only one feature can be active at a time.
• Completion requires passing validation evidence.
• Non-final completion requires validationScope: "targeted".
• Final completion requires validationScope: "broad" and a passing final review matching the plan's finalReviewPolicy.
• flow_session_close accepts kind: "completed" only after an approved plan has passed final completion.
• Reset keeps prior history entries as audit/provenance data. Current state comes from features, activeFeature, status, progress, and closure, not from old completion summaries.
• Deferred and abandoned closures archive the session with its status at the time of closure, clear the active session file, and remove the generated instruction projection.

Planning quality, decomposition, review depth, validation adequacy, orchestration, and recovery judgment live in the skills.

State Layout

.flow/session.json
.flow/opencode-instructions.md
.flow/history/<session-id>.json
.flow/session.lock/

Versioning .flow state is opt-in. Keep it ignored by default, and archive only exact Flow session artifacts when a maintainer intentionally asks for them; avoid broad forced adds of .flow/**.

Development

bun install
bun run check

The package exports only the OpenCode plugin entrypoint:

import flowPlugin from "opencode-plugin-flow";

Credits

Flow's parallel orchestration guidance was inspired by Ray Fernando's skill work on parallel agent workflows. Flow also draws conceptual inspiration from RepoPrompt CE, especially its emphasis on codebase orientation, context engineering, agent orchestration, and reviewable handoffs.

The Flow version is its own OpenCode-native design: skills-first, manager-owned state, hidden workers, and no extra runtime ledger.

Uninstall

First remove opencode-plugin-flow from your OpenCode plugin config so future OpenCode startups stop loading Flow. Then remove Flow-owned synced skills:

npx -y opencode-plugin-flow@4.1.12 uninstall

Restart OpenCode after both steps. This removes Flow-owned synced skills when they are pristine. User-edited or foreign skill folders are kept.